Wireless I/O Module


Features


  • 4 Analog inputs (0-20mA or 0-5V)
  • 4 Analog outputs (0-20mA or 0-5V)
  • 2 Digital inputs
  • 2 Relay outputs (1 DPDT, 1 SPDT)
  • Powerful 300 mW radio with antenna kit
  • Wide range DC power input. 10 to 30VDC
  • DIN Rail Mount with pluggable screw terminal blocks
  • Status LEDs
  • Class 1 Division 2 Certified, Groups C&D, Temperature Code T5.  Certified to CSA C22.2 No. 213, Conforms to ISA 12.12.01


Point to Point I/O Mirroring Configuration:

The analog/digital inputs on one module can be replicated on the other module (and vice versa)-ideal for stand alone valve control or simple retrofit applications.


SignalFire Remote Node Configuration:

Operates as a remote node with a standard SignalFire Gateway.  All IO data is available at the Gateway as Modbus registers. Supports Modbus writes to control the analog and relay outputs.

Gateway Stick

Integrated gateway and high-gain antenna


Features


  • Optional Ethernet Modbus TCP interface
  • Optional Analog Output Module
  • Unique design integrates high-gain, omni-directional antenna and gateway electronics in one place
  • Tough materials withstand rugged outdoor environments
  • RS485 Modbus RTU interface
  • RS232 configuration and debug port
  • Optional remote shutdown programmable control logic, no additional PLC required
  • Stores the most recent readings of all nodes in the network in Modbus format
  • Times out readings from off-line sensors
  • Manages outbound communications
  • Reduces power consumption
  • Mounts with clamps, brackets, or standard electrical/plumbing fittings
  • 500mW radio with high gain antenna
  • Automatically configures as a star or mesh network
  • Class 1 Division 2 (C1D2), Temp Code T5, Groups C&D.  Conforms to ISA 12.12.01 and UL 916, Certified to CSA C22.2 No. 142 and CSA C22.2 No. 213

Tilt Scout

Intrinsically Safe Wireless Inclinometer Sensor (patent pending)


Features


  • 3 Axis Accelerometer constantly monitors angle and reports status. Will report on state change.
  • Hazardous Location Certified – Class 1 Division 1 is pending
  • Rugged design for outdoor environments
  • Magnetic mounting or with built-in installation holes
  • Pushbutton zeroing
  • Long battery life (greater than 5 years)
  • Up to ½ mile range
  • Built-in 900mHz radio and antenna
  • Operates as a standard wireless node in the SignalFire network

Ethernet Interface Module


Features


  • Direct connection to the SignalFire Gateway-in-a-Stick
  • Modbus TCP access to all data, supports up to 16 simultaneous server connections
  • Allows remote configuration/diagnostics using the SignalFire ToolKit
  • Power Over Ethernet (PoE) support with auto switchover to DC power supply
  • Wide input voltage range of 6-36VDC
  • Industrial Temperature range of -40 to +85C
  • Conformal coated electronics
  • Easy web page configuration
  • DB9 port for local connection to gateway
  • Small form factor DIN mount enclosure
  • Status LED’s
  • Ethernet 10/100 base TX with Auto Negotiation, and HP Auto MDIX. RJ45 Connector

Gateway DIN Mount


Features

  • RS485 Modbus RTU interface
  • Two configurable digital outputs for local alarming and control
  • RS232 configuration and debug port
  • RP-SMA Antenna port for connection to 900 MHz antennas
  • Two digital outputs for local signaling or alarming, internal logic to map any remote data to the outputs
  • Optional Ethernet Modbus TCP interface module
  • Optional Analog Output Module
  • Optional remote shutdown programmable control logic, no additional PLC required
  • Stores the most recent readings of all nodes in the network in Modbus format, register remapping supported
  • Supports remote node configuration
  • Remote HART sensor configuration using PACTware or Radar Master
  • Timesout readings from off-line sensors
  • Manages outbound communications
  • Internal Event logging
  • DIN Mount into existing panel boxes
  • 6-36 VDC wide range power input
  • 500 mW radio
  • Automatically configures as a star or mesh network
  • Class 1 Division 2 Certified, Groups C&D, Temperature Code T5.  Certified to CSA C22.2 No. 213, Conforms to ISA 12.12.01

Wireless IO and Wire Replacement

Interfaces Available

  • HART
  • Analog
  • Digital
  • Modbus
  • Turbine
  • Thermocouple
  • RTD

C1D1 Solar Power


The C1D1 Solar Power is self contained Class 1 Division 1 Intrinsically Safe solar power system.  It consists of a solar panel with mounting bracket and integrated potted battery and high efficiency solar charger.


Bracket mounting kits are available.


Features


  • Class 1, Division 1, Temp Code T3, Groups C&D. Conforms to UL Std. 913, Certified to Can/CSA Std C22.2 No. 157
  • Provides power to both the Sentinel node and its attached sensor
  • Sealed lead acid batteries for long life and extended temperature range operation
  • Fully encapsulated batteries and electronics
  • High capacity version available for demanding power requirements

Pressure Scout


Intrinsically Safe Wireless Pressure Sensor


Features


  • Powers integrated pressure sensor and radio for years with an internal battery
  • Class 1 Division 1 Intrinsically safe system
  • Rugged design for outdoor environments
  • Up to ½ mile range
  • ½” NPT Process connection standard
  • Rapid pressure sampling with configurable alarms and report by exception
  • Extremely low power and long battery life
  • Compact and simple to install and maintain
  • Available in standard pressure ranges
  • Pushbutton or remote zeroing

Features

  • Powers sensor and radio for years with an internal battery
  • Class 1 Division 1 Intrinsically safe system
  • Optional Class 1 Division 1 solar module with integrated charger,
  • battery panel, and mounting bracket
  • Costs less than 60ft of installed conduit
  • Rugged design for demanding outdoor environments
  • Up to 1/2 mile range
  • Sensor independent
  • 1/2” NPT conduit interface
  • Automatically configures as a star or mesh network
  • Simple to install and MaintainType your paragraph here

The SignalFire Remote Sensing System™ is a robust long-range wireless mesh network designed for remote monitoring and control in challenging outdoor environments. The system works with level, pressure, temperature and flow meters, as well as offering critical asset control of valves, pumps, fans, heaters and an array of other devices.

The SignalFire Remote Sensing System has been deployed in oil & gas fields and pipelines, petrochemical processing plants, crop and irrigation monitoring systems, transportation monitoring systems, and municipal infrastructure monitoring and control systems, as well as a variety of other applications.

Our remote asset monitoring & control solutions can provide both communications and power to your sensors, making your application truly wireless. A wide range of sensor types are compatible, including 4-20 mA, 1.5V, Modbus, Hart, Digital IO and other analog and digital interfaces.

FLOW TOTALIZER WITH DISPLAY

C1D1 Intrinsically Safe Wireless Flow Totalizer


Features


  • Local display with, flow rate, totalizer and diagnostics
  • Integrates with industry standard turbine meters
  • Hazardous location classified for CL1 DIV1 Intrinsically Safe
  • Robust 900mHz authenticated wireless protocol
  • 0.5 mile range
  • Battery powered electronically optimized for long life (5 years+)
  • Real-Time-Clock with battery backup
  • 1” female NPT standard coupling with 2 pin connector inductive type turbine meters
  • Configurable contract hour with real-time clock & battery backup
  • 30 day built-in local data historian/backup storage
  • Wireless data interface to SignalFire’s standard protocol
  • Weathertight rugged enclosure for outdoor operation
  • Easy to install and maintain


Industries


  • Oil and Gas
  • Water & Wastewater
  • Gas Utility
  • Chemical
  • Power
  • Food & Beverage
  • Aerospace
  • Pharmaceutical
  • Metals and Mining
  • Pulp & Paper

Field Monitor Display

Displays Network Data


Features


  • Local display of data from network sensors
  • Math functions for tank volume calculations
  • Feet and inch conversion
  • 30 pages of display information each with 11 lines of data
  • Internal Long life battery pack
  • Rugged design for demanding outdoor environments
  • 300mW radio with high gain antenna
  • Range up to 3 miles
  • Simple to install and maintain

Call (435) 781-2128 or (866) 917-2724

Node Checker and remote configuration tool

The SignalFire Node Checker is a setup, configuration and network health tool recommended for all installers.


Features


  • Remote Configuration allows the NodeChecker to wirelessly connect to a node and view/change/save configuration items including sensor zeroing
  • Replaces the wired configuration process once a node is installed
  • Queries the status of any node in the network
  • Provides wireless signal and routing information
  • View sensor data from any node
  • USB powered
  • Available with wireless PACTware and Rosemount Radar Master support for wireless configuration of attached HART sensors

Float Scout

Intrinsically Safe Wireless Tank Level Monitoring


Features


  • Available with flexible or rigid magnetostrictive level probe with single or dual floats
  • for level and interface measurements
  • Integrated temperature sensor to measure fluid temperature
  • Class 1 Division 1 intrinsically safe
  • Rugged design for demanding outdoor environments
  • Up to 1/2 mile range
  • 1” NPT mounting interface
  • Automatically configures as a star or mesh network

Intrinsically Safe Modules for Hazardous Areas